Installation; Selection Of The Best Location - LG MULTI V ARNU07GTUA4 Engineering Product Data Book

Indoor unit

10. Installation

• Please read the instruction sheets completely before installing the product.
• When the power cord is damaged, replacement work shall be performed by authorized personnel only.
• Installation work must be performed in accordance with the national wiring standards by authorized personnel only.
Installation Parts Provided
1. Installation guide map
2. Type "A" screw and plastic anchors
Required Parts
o Four type "A" screws
o Connecting cable
o Pipes: Gas side
Liquid side
o Insulation materials
o Additional drain pipe

10.1 Selection of the best location

• Do not have any heat or steam near the unit.
• Select a place where there are no obstacles in front of the unit.
• Make sure that condensation drainage can be conveniently
routed away.
Do not install near a doorway.
• Ensure that the space around the left and right of the unit is
more than 500mm. The unit should be installed as high on the
wall as possible, allowing a minimum of 200mm from ceiling.
• Use a stud finder to locate studs to prevent unnecessary dam-
age to the wall.
12 _
ARTCOOL (Gallery)
Required Tools
o Level gauge
o Screw driver
o Electric drill
o Hole core drill
o Flaring tool set
o Specified torque wrenches
o Spanner......................................................Half union
o A glass of water
o Screw driver
o Thermometer
More than
500mm
More than 1500mm
More than
200mm
More than
500mm