Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Click the Find button to locate a specific entry based on the information entered.
Click the Clear All button to clear all dynamic MAC addresses.
Click the Show All button to display all the MAC addresses recorded in the MAC address table.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
MAC Notification
This window is used to display and configure MAC notification.
To view the following window, click L2 Features > FDB > MAC Notification, as shown below:
The fields that can be configured are described below:
Parameter
MAC Address Notification
Interval
History Size
MAC Notification Trap State
Trap Type
Unit
From Port - To Port
Added Trap
Removed Trap
Figure 5-7 MAC Notification (MAC Notification Settings) Window
Description
Select to enable or disable MAC notification globally on the Switch
Enter the time value between notifications. This value must be between 1 and
2147483647 seconds. By default, this value is 1 second.
Enter the maximum number of entries listed in the history log used for
notification. This value must be between 0 and 500. By default, this value is 1.
Select to enable or disable the MAC notification trap state.
Select the trap type here. Options to choose from are:
• Without VID - Specifies the trap information without the VLAN ID.
• With VID - Specifies the trap information with the VLAN ID.
Select the stacking unit ID of the Switch that will be configured here.
Select the range of ports that will be used for this configuration here.
Select to enable or disable the added trap for the port(s) selected.
Select to enable or disable the removed trap for the port(s) selected.
102
Advertisement
Table of Contents
