Cpu Protect Counters - D-Link DGS-3130 Series Web Ui Reference Manual

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in Safeguard Engine Settings are described below:
Parameter
Safeguard Engine State
Trap State
The fields that can be configured in CPU Utilization Settings are described below:
Parameter
Rising Threshold
Falling Threshold
Click the Apply button to accept the changes made.

CPU Protect Counters

This window is used to view and clear the CPU protection counter information.
To view the following window, click Security > Safeguard Engine > CPU Protect Counters, as shown below:
The fields that can be configured are described below:
Parameter
Sub Interface
Protocol Name
Figure 9-80 Safeguard Engine Settings Window
Description
Select to enable or disable the safeguard engine feature here.
Select to enable or disable the safeguard engine trap state here.
Description
Enter the rising threshold value here. This value must be between 20% and
100%. This value is used to configure the acceptable level of CPU utilization
before the Safeguard Engine mechanism is enabled. Once the CPU utilization
reaches this percentage level, the Switch will move into Exhausted mode,
based on the parameters provided in this window.
Enter the falling threshold value here. This value must be between 20% and
100%. This value is used to configure the acceptable level of CPU utilization as
a percentage, where the Switch leaves the Safeguard Engine state and returns
to normal mode.
Figure 9-81 CPU Protect Counters Window
Description
Select the sub-interface option here. Options to choose from are Manage,
Protocol, Route, and All. This option specifies to clear the CPU protect related
counters of sub-interfaces.
Select the protocol name option here.
361