Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
IPv6 Precedence
Metric
Metric Type
Click the Apply button to accept the changes made.
Click the Back button to return to the previous window.
Policy Route
This window is used to display and configure the policy route settings.
To view the following window, click L3 Features > Policy Route, as shown below:
The fields that can be configured are described below:
Parameter
Type
Click the Edit button to modify the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
Description
Recursive - Specifies the IPv6 address of the recursive as the next-hop router.
Enter the recursive next-hop IPv6 address in the space provided here.
Select the IPv6 precedence option here. Options to choose from are Routine,
Priority, Immediate, Flash, Flash Override, Critical, Internet, and Network.
Use this feature to set the precedence value in the IPv6 header. This option
only takes effect when policy routing involves the IPv6 packet.
Select and enter the metric value here that will be used in the modification. The
range is from 0 to 4294967294.
Select the metric type here that will be used in the modification. Options to
choose from are Type-1 and Type-2.
• Type-1 - Specifies to use the OSPF external type-1 metric.
• Type-2 - Specifies to use the OSPF external type-2 metric.
Figure 6-87 Policy Route Window
Description
Select the policy route type here. Options to choose from are IP Policy and
IPv6 Policy.
Figure 6-88 Policy Route (Edit) Window
242
Advertisement
Table of Contents
