Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Host IP
Cost
Click the Apply button to accept the changes made.
Click the Delete button to delete the specified entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
OSPFv3
OSPFv3 Process Settings
This window is used to display and configure OSPFv3 process settings.
To view the following window, click L3 Features > OSPF > OSPFv3 > OSPFv3 Process Settings, as shown below:
Click the Edit button to modify the specified entry.
Click the Show Detail button to view more detailed information about the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
After clicking the Edit button, the following page will appear.
The fields that can be configured are described below:
Parameter
OSPF State
Router ID
Default Metric
Description
Enter the host IPv4 address here.
Enter the cost value for the stub entry here. The range is from 1 to 65535.
Select the Default option to use the default value, which is 1.
Figure 6-53 OSPFv3 Process Settings Window
Figure 6-54 OSPFv3 Process Settings (Edit) Window
Description
Select to enable or disable the OSPFv3 state.
Enter the router ID for the OSPF process here.
Enter the default metric value for the OSPF process here. The range is from 1
to 16777214. By default, this value is 20. This value is used in conjunction with
the OSPFv3 redistribution feature to enable the current routing protocol to use
the same metric value for all redistributed routes. A default metric helps solve
the problem of redistributing routes with incompatible metrics. Whenever the
220
Advertisement
Table of Contents
