Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
Direction
Click the Back button to return to the previous step.
Click the Apply button to accept the changes made and return to the main ACL Wizard window.
ACL Access List
This window is used to display and configure the ACLs, ACL rules and settings.
To view the following window, click ACL > ACL Access List, as shown below:
The fields that can be configured are described below:
Parameter
ACL Type
ID
ACL Name
Click the Find button to locate a specific entry based on the information entered.
Figure 8-7 ACL Configuration Wizard (Create, Port) Window
Description
Select the Switch unit that will be used for this configuration here.
Select the appropriate port range used for the configuration here.
Select the direction here. Options to choose from are In and Out.
Figure 8-8 ACL Access List Window
Description
Select the ACL type to find here. Options to choose from are All, IP ACL, IPv6
ACL, MAC ACL, and Expert ACL.
Select and enter the access list ID here. The range is from 1 to 14999.
Select and enter the access list name here. This name can be up to 32
characters long.
278
Advertisement
Table of Contents
