Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
TFTP Server IP
Source File
Destination File
Click the Backup button to initiate the configuration file backup.
Log Backup
Log Backup to HTTP
This window is used to initiate a system log backup to a local PC using HTTP.
To view the following window, click Tools > Log Backup > Log Backup to HTTP, as shown below:
The fields that can be configured are described below:
Parameter
Log Type
Click the Backup button to initiate the system log backup.
Log Backup to TFTP
This window is used to initiate a system log backup to a TFTP server.
To view the following window, click Tools > Log Backup > Log Backup to TFTP, as shown below:
The fields that can be configured are described below:
Description
Enter the TFTP server IP address here. When select the IPv4 option, enter the
IPv4 address of the TFTP server in the space provided. When the IPv6 option
is selected, enter the IPv6 address of the TFTP server in the space provided.
Enter the source filename and path of the configuration file located on the
Switch here. This field can be up to 64 characters long. Select the running-
config option to back up the running configuration file from the Switch. Select
the startup-config option to back up the start-up configuration file from the
Switch.
Enter the destination path and location where the configuration file should be
stored on the TFTP server. This field can be up to 64 characters long.
Figure 13-10 Log Backup to HTTP Window
Description
Select the log type that will be backed up to the local PC using HTTP.
• When the System Log option is selected, the system log will be backed
up.
• When the Attack Log is selected, the attack log will be backed up.
Figure 13-11 Log Backup to TFTP Window
428
Advertisement
Table of Contents
