Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
• Any MIB view that defines the subset of MIB objects that will be accessible to the SNMP community.
• Read-write or read-only level permissions for the MIB objects accessible to the SNMP community.
To view the following window, click Management > SNMP > SNMP Community Table Settings, as shown below:
The fields that can be configured are described below:
Parameter
Key Type
Community Name
View Name
Access Right
IP Access-List Name
Click the Add button to add a new entry based on the information entered.
Click the Delete button to remove the specified entry.
SNMP Group Table Settings
An SNMP group created with this table maps SNMP users to the views created in the SNMP View Table Settings
window.
Figure 4-10 SNMP Community Table Settings Window
Description
Select the key type for the SNMP community. Options to choose from are Plain
Text, and Encrypted.
Enter an alphanumeric string of up to 32 characters that is used to identify
members of an SNMP community. This string is used like a password to give
remote SNMP managers access to MIB objects in the Switch's SNMP agent.
Enter an alphanumeric string of up to 32 characters that is used to identify the
group of MIB objects that a remote SNMP manager is allowed to access on the
Switch. The view name must exist in the SNMP View Table.
Select the access right here. Options to choose from are Read Only and Read
Write.
• Read Only - SNMP community members using the community string
created can only read the contents of the MIBs on the Switch.
• Read Write - SNMP community members using the community string
created can read from, and write to the contents of the MIBs on the
Switch.
Enter the name of the standard access list to restrict the users that can use this
community string to access to the SNMP agent.
39
Advertisement
Table of Contents
