Network Access Authentication Port Settings - D-Link DGS-3130 Series Web Ui Reference Manual

DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Click the Apply button to accept the changes made.
The fields that can be configured in User Information are described below:
Parameter
User Name
VID
Password Type
Password
Click the Apply button to accept the changes made.
Click the Delete button to remove the specified entry.

Network Access Authentication Port Settings

This window is used to display and configure the network access authentication port settings.
To view the following window, click Security > Network Access Authentication > Network Access Authentication
Port Settings, as shown below:
The fields that can be configured are described below:
Description
RADIUS server will be accepted if the authorization status is enabled.
Bandwidth and ACL are assigned on a per-port basis. If in the multi-
authenticated mode, VLAN and 802.1p are assigned on a per-host basis.
Otherwise, Bandwidth and ACL are assigned on a per-port basis.
Description
Enter the user name used here. This name can be up to 32 characters long.
Enter the VLAN ID used here.
Select the password type option here. Options to choose from are Plain Text
and Encrypted.
Enter the password used here.
Figure 9-718 Network Access Authentication Port Settings Window
357