Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured in SIM Role Configure are described below:
Parameter
Role State
Group Name
Click the Apply button to accept the changes made.
The fields that can be configured in SIM Settings are described below:
Parameter
Trap State
Interval
Hold Time
Management VLAN
Click the Apply button to accept the changes made.
After enabling the Switch to be a Commander Switch (CS), the Single IP Management folder will then contain four
added links to aid in configuring SIM through the Web UI, including Topology, Firmware Upgrade, Configuration
File Backup/Restore and Upload Log File.
Topology
This window is used to view, manage and configure the Switch within the SIM group and requires Java to function
properly on your computer.
Description
Select to change the SIM role of the Switch. Options to choose from are
Candidate, and Commander.
• Candidate - A Candidate Switch (CaS) is not the member of a SIM group
but is connected to a Commander Switch. This is the default setting for the
SIM role of the Switch.
• Commander - Select to make the Switch a Commander Switch (CS). The
user may join other Switches to this Switch, over Ethernet, to be part of the
SIM group. Choosing this option will also enable the Switch to be
configured for SIM.
Enter a group name. This is optional. This name is used to segment Switches
into different SIM groups.
Description
Select to enable or disable the SIM trap state here.
Enter the interval in seconds. The range is from 30 to 90.
Enter the hold-time in seconds. The range is from 100 to 255.
Enter the single IP management message VLAN ID.
86
Advertisement
Table of Contents
