Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
Parameter
Mutation Name
Input DSCP List
Output DSCP List
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
Port Trust State and Mutation Binding
This window is used to display and configure the port trust state and mutation binding settings.
To view the following window, click QoS > Advanced Settings > Port Trust State and Mutation Binding, as shown
below:
The fields that can be configured are described below:
Parameter
Unit
From Port - To Port
Trust State
DSCP Mutation Map
Click the Apply button to accept the changes made.
DSCP CoS Mapping
This window is used to display and configure the DSCP CoS mapping settings.
To view the following window, click QoS > Advanced Settings > DSCP CoS Mapping, as shown below:
Description
Enter the DSCP mutation map name here. This name can be up to 32
characters long.
Enter the input DSCP list value here. This value must be between 0 and 63.
Enter the output DSCP list value here. This value must be between 0 and 63.
Figure 7-8 Port Trust State and Mutation Binding Window
Description
Select the Switch unit that will be used for this configuration here.
Select the range of ports that will be used for this configuration here.
Select the port trust state option here. Options to choose from are CoS and
DSCP.
Select and enter the DSCP mutation map name used here. This name can be
up to 32 characters long. Select the None option to not allocate a DSCP
mutation map to the port(s).
254
Advertisement
Table of Contents
