Table of Contents
Advertisement
DGS-3130 Series Layer 3 Stackable Managed Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Asymmetric VLAN State
Click the Apply button to accept the changes made.
MAC VLAN
This window is used to display and configure the MAC-based VLAN information. When a static MAC-based VLAN
entry is configured, the VLAN operating on the port will be changed.
To view the following window, click L2 Features > VLAN > MAC VLAN, as shown below:
The fields that can be configured are described below:
Parameter
MAC Address
VID
Priority
Click the Apply button to accept the changes made.
Click the Delete button to remove the specific entry.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.
VLAN Interface
This window is used to display and configure the VLAN interface settings.
Figure 5-17 Asymmetric VLAN Window
Description
Select to enable or disable the asymmetric VLAN feature here.
Figure 5-18 MAC VLAN Window
Description
Enter the unicast MAC address.
Enter the VLAN ID that will be used.
Select the priority that is assigned to untagged packets. This value is between 0
and 7.
109
Advertisement
Table of Contents
