Huawei FusionCol8000-C210 User Manual page 112

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Netherland GS)
●
Figure 5-14 Checking before startup
Step 4 Follow the onscreen instructions to complete the wizard-based startup.
1.
2.
Issue 01 (2022-12-30)
Tap No to exit the wizard-based startup mode.
Select the items that are involved in wizard-based startup (all items are
selected by default when you access the commissioning item selection screen
for the first time) and confirm whether to start the task.
– Tap Yes to start the system and commission components.
– Tap No to exit the commissioning while keeping the system shut down.
Figure 5-15 Wizard-based startup
NO TE
After a component is commissioned successfully, the system automatically
proceeds with the next component you selected. Please wait during the
commissioning.
Check the commissioning result.
– If the message "Commissioning succeeded" is displayed in the lower left
corner, tap Confirm. The home screen is displayed.
– If the message "Commissioning failed" is displayed in the lower left
corner:
i. Click the link at "Commissioning failed" to view the failure cause, tap
Back and Confirm, and troubleshoot based on the failure cause.
ii. On the home screen, choose Maintenance > Wizard Startup and
perform commissioning again.
Copyright © Huawei Digital Power Technologies Co., Ltd.
5 Power-On Commissioning
104