How Do I Commission A Component - Huawei FusionCol8000-C210 User Manual

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Netherland GS)
Figure 11-8 Setting alarm parameter 2
----End

11.1.13 How Do I Commission a Component?

Context
●
●
●
Procedure
Step 1 Choose Maint > Diagnostic Mode > Enter.
Step 2 Set Indoor fan to 50%.
Issue 01 (2022-12-30)
On the diagnostic mode screen, you can turn on or off components, and
control their output ratio.
If you need to manually turn on or off system components in diagnostic
mode, ensure that the smart cooling product is started before operation.
Take commissioning the indoor fan as an example.
NO TE
The screen for entering the diagnostic mode:
● Components are interlocked for protection. Therefore, buttons for enabling or disabling
certain components may be gray, indicating that operations on the components are not
allowed.
● To ensure system security, a component may not promptly respond to operations
performed on this screen.
● To exit the diagnostic mode, tap
● The system automatically exits diagnostic mode when it reaches the maximum
diagnostic mode duration.
Copyright © Huawei Digital Power Technologies Co., Ltd.
on the status bar.
11 FAQ
143