Replacing A Main Control Module Or An Auxiliary Psu - Huawei FusionCol8000-C210 User Manual

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Netherland GS)
Figure 10-8 Removing a PSU
Step 5 Replace the new PSU.
Step 6 Power on the device again and close the electric control box.
Step 7 Install the air filter in the middle.
Step 8 After startup, check that the smart cooling product is running properly and no
alarm is generated.
----End
10.7 Replacing a Main Control Module or an Auxiliary
PSU
The procedure for replacing an auxiliary PSU is similar to that of replacing a main
control module. The following uses the main control module as an example.
Prerequisites
●
●
●
● The new module must be installed in the same slot of the original one.
Otherwise, the smart cooling product may fail to work properly.
● Before replacing the main control module, remove the cables from the module.
After replacing it, download the software and
technical support website, and upgrade it on the display module.
Issue 01 (2022-12-30)
A main control module needs to be replaced.
A spare main control module of the same model is available and functional.
Recommended tool: Phillips screwdriver
NO TICE
Copyright © Huawei Digital Power Technologies Co., Ltd.
10 Parts Replacement
ACC Upgrade Guide from the
128