Huawei FusionCol8000-C210 User Manual page 80

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Netherland GS)
Figure 4-39 Connecting the water detector
Step 4 Plan the installation position for the fastener of the water detection cable. Ensure
that the water detection cable placed on the fastener is in good contact with the
floor.
Step 5 Tear off the protection paper on the rear of the fasteners, and then securely attach
the fasteners to the floor.
Figure 4-40 Installing a fastener
Figure 4-41 Installing a clamp
Issue 01 (2022-12-30)
NO TE
Extend the detection rope or along the water pipe or lay a detection rope around the unit
in places prone to water leakage or requiring extra protection for components.
NO TE
● One fastener is provided for a 1 m long water detection cable.
● When securing the water detection cable to the concrete floor, use the cable nail clips
delivered with the cable to secure the cable.
Copyright © Huawei Digital Power Technologies Co., Ltd.
4 System Installation
72