Optional) Connecting A Differential Pressure Sensor - Huawei FusionCol8000-C210 User Manual

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Netherland GS)
Locati
on
● The default T/H sensor address is 1.
● After the addresses are set, power on the device, choose Settings > System
Settings > T/H sensor on the home screen of the display module, and set the
sensors in the aisles corresponding to the addresses to Enable. Otherwise, the
sensors will not work.
----End
4.9 (Optional) Connecting a Differential Pressure
Sensor
Procedure
Step 1 Secure the differential pressure sensor and the fasteners using M5 tapping screws,
as shown in step 1 in
Figure 4-35 Securing a differential pressure sensor
Step 2 Connect the pressure inlet tube.
Issue 01 (2022-12-30)
Display Ad
Name dre
ss
Hot aisle 25
T/H
sensor 5
NO TICE
Figure
Copyright © Huawei Digital Power Technologies Co., Ltd.
DIP Switch Sequence No.
1 2 3
ON OFF OFF
4-35.
4 System Installation
4 5 6
ON ON OFF
68