Huawei FusionCol8000-C210 User Manual page 137

FusionCol8000-C210 In-room Chilled Water Smart
Cooling Product
User Manual (2022, Netherland GS)
Procedure
Step 1 (Optional) Back up data.
1.
2.
Step 2 Tap Shutdown on the home screen of the display module.
Exercise caution because the device is still energized after it is shut down on the
home screen of the display module.
Step 3 Open the electric control box, and switch off the active circuit breaker (QF1) and
standby circuit breaker (QF2).
Step 4 Remove the air filter in the middle.
Step 5 Disconnect cables from the main control module and remove the module.
Figure 10-9 Removing a main control module
Step 6 Install the new main control module and connect cables.
Step 7 After power-on, check that the smart cooling product is running properly and no
alarm is generated.
Step 8 Install the air filter.
Step 9 (Optional) Import the configuration.
1.
2.
Issue 01 (2022-12-30)
Insert a USB flash drive into the main control module. Go to Maintenance >
USB Operations > Export as an admin user to back up data to the USB flash
drive.
Log in to the WebUI as an admin user. Choose Maintenance >
Configuration. (Optional) After entering Configuration File Encryption
Password, tap Back Up Current Settings to back up data to the computer.
NO TICE
Insert a USB flash drive into the main control module. Go to Menu >
Maintenance > USB Operations > Import Config as an admin user to import
the backup data in the USB flash drive.
Log in to the WebUI as an admin user. Choose Menu > Maintenance >
Configuration File, and choose the backup data. (Optional) After entering
Copyright © Huawei Digital Power Technologies Co., Ltd.
10 Parts Replacement
129