Fujitsu AIRSTAGE UTY-ALGX Instruction Manual page 123


To import data, the VRF Controller must be stopped.
A confirmation screen appears. If okay, click the [OK] button.

Note
The VRF Controller stops and the data are imported.

When import is complete, the message shown below appears.
After clicking [OK] button, restart the VRF Controller.

Note
To restart the VRF Controller, after performing "11-2 Ending the VRF Controller", perform "11-1 VRF Con-
troller starting method".
You cannot import files created with the old version (0.1.0.0, 0.1.0.1) of the System Controller Lite.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
123