Network Setting (Client Pc Side Setting) - Fujitsu AIRSTAGE UTY-ALGX Instruction Manual

6-2

Network setting (client PC side setting)

The setting contents vary depending on the server and client connection method. Perform setting after con-
firming the connection method.
The System Controller Lite can be used in the following network connection modes:
1. LAN connection
In this mode, the System Controller Lite can be accessed by multiple terminals on the user's premises con-
nected by intranet.
Required environment : LAN connection environment
Network Interface
LAN cable
Hubs or Routers may become necessary
→ See par. 6-2-1 LAN connection setting
2. Internet connection
Setting is not particularly necessary at the client terminal, but if not authorized by the network adminis-
trator, connection may be impossible.
3. Dial–up connection
This mode uses a telephone line to dial-up connect to a server installed on the user's premises.
Required environment: Telephone line, modem
→ See par. 6-2-2 Dial-up connection setting
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
60