Table of Contents
Advertisement
Fan Speed
Fan speed setting
Set Fan speed by the [V] and [Λ] buttons.
To set to automatic, select [Auto].
Fan Speed:Quiet, Low, Med-Low, Med, Med-High, High, and Auto
*
For "Auto" details, see "About the Auto setting of fan speed".
5
Pattern operation setting
5
R.C Prohibition
R/C prohibition: Restricts operation from R/C.
All: All operations prohibited
On/Off: Operation start/operation stop prohibited
On: Operation start prohibited V-II/V-III/VR-II/J-II/J-IIS Series
Mode: Operation switching prohibited
Temp: Temperature setting prohibited
Timer: Timer prohibited
Filter: Filter reset prohibited
Filter Reset
Displays filter sign on/off and resets filter sign (elapsed time).
Display contents
Filter sign
"Blank"
No filter sign
Note
When operation is performed and reflected at a unit, always click [Send].
If the settings are not sent, operation will not be reflected at the unit.
When multiple R/C groups were selected, the settings are sent only to the settable units.
When the unit to be operated is in a state in which it cannot be operated, each setting item cannot be
operated.
Check whether or not the unit is in a state in which it cannot be operated by means of the icon displayed
at the "RSTR" row of the system list.
Displayed icon
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
Standard display state
166
Switch to extended display by
[s] button.
Message area
Reset/send/close
Advertisement
Table of Contents
