(c)
View icon
When clicked, "List view" is changed according to the selected hierarchy.
(d)
Status display
Displays the timer setting and status of each unit in a tree display
Indoor unit Running
Running in group (*2)
Indoor unit Stopped
All stopped in group
(*2)
*2.
Displayed when unit hierarchy was not displayed and when group setting is performed. (For a detailed
description of group setting, see par. 8-3-5 Group setting.)
If even one unit in a hierarchy and group is in one of the states shown above, the icon color is
changed and the icon is displayed. The priority order is 1: Emergency stop, 2: Error, 3: Test, 4: On,
5: Off.
(e)
Tree item
When clicked, all the units in the selected hierarchy are selected.
Batch operation and setting are performed.
Note
●
Tree view may not be displayed on the screen depending on the contents. In this case, scroll the dis-
play using the scroll bar at the side of the screen.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
No icon
Timer setting invalid
*1.
For a detailed description of timer setting, see par. 18.
Schedule Operation.
No icon
Low noise schedule status (*1)
Low noise schedule allocated
Low noise schedule invalid
*1.
For a detailed description of timer setting, see par.
21.Low Noise Operation.
Indoor unit
Error signal received
Error signal received
in group (*2)
Indoor unit Testing
Testing in group (*2)
159
Timer not set (*1)
Timer set
Outdoor unit
Outdoor unit error
signal received
Emergency stop sig-
nal received