Table of Contents
Advertisement
Specify the display content on graph.
Present:It displays the state at current time.
History:The state of specified date and hour will be displayed by pressing [Display].
Press [CSV] button to display the dialogue which save the currently displayed graph data at CSV for-
mat.
Please save it in any folder.
5
Press [Setting] button to open Peak Cut Control Setting screen.
The peak cut control graph is displayed.
Peak cut control graph monitor what control is used and how much electricity energy is consumed in
current peak cut control.
Display timing
• When peak cut control is changed from "Not Active" to "Active" at peak cut control screen.
• When graph display type ( ) is changed from "Present" to "History" and "Display" button is pressed.
• When graph display type ( ) is changed from "History" to "Present".
• The timer cycle (Default 20 seconds) in the case of peak cut control is effective and graph display
type ( ) is "Present".
Average Power/Target Power is displayed.
Average power and target power is displayed.
In the case "present"graph, the current value is displayed. In the case of "History"graph, a value in exit
time is displayed.
Data for the specified Date.
Max. Average Power information and Aggregate Power information on specified date is displayed.
(a) Max. Average Power: it means the maximum average power recorded on specified date.
(b) Max. Average Power recording time (display the end time): It displays the final time of recorded
time limit.
(c) Max. Average Power recording ratio: it is a ratio of maximum average power recorded on specified
date to target power.
(d) Aggregate Power: It displays the integrating power on specified date.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
237
Advertisement
Table of Contents
