Fujitsu AIRSTAGE UTY-ALGX Instruction Manual page 296

<For an electricity apportionment of outdoor unit + indoor unit + RB unit>→ Necessary to connect the
electricity meter to all outdoor units, indoor units and RB units.
Whm
Whm
Whm

Electricity apportionment for DX-
● When electricity meter not connected
The following units can be linked to the DX-Kit, by using external output terminals.
[A] ：External fan
[B] ：Units linked to run/stop state external output
At electricity apportionment, the DX-Kit itself and units [A] and [B] mentioned above can be handled.
Set the electricity value at ON beforehand for the units [A] and [B] from the "Parameter Setting" screen.
The input value is included in the calculation as a constant value when the external output terminal is
ON.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
Kit
DX-Kit
[B] External fan
[A] Run/stop state
External output linked units
296
All outdoor units, indoor units and RB
units must be connected to an electricity
meter.
Electricity meter is not connected to some
indoor units and RB units
Electricity meter is not connected to some
RB units