Table of Contents
Advertisement
Example of DX-Kit
display
Note
*
A value may be given in ( ) after "Model Name".
For detail of the number, refer to the description in the "ReadMeFirst.txt" file within the installation DVD.
Example of RB
unit display
[OK]:
Saves the edited contents and ends setting.
[Cancel]:
Ends setting without saving the edited contents.
(When [Apply] was performed during work, it cannot be canceled by [Cancel].)
[Apply]:
Saves the edited contents without ending setting.
Displays whether setting are done for all units.
Status: OK - setting are done for all units.
Status: Necessary - Some units still need to be set parameters.
Note
●
Except for indoor- and outdoor-units, items cannot be displayed in Tree View.
●
If not even one indoor unit or outdoor unit is connected, there may be a display at
setting is unnecessary.
●
When a unit was added or replaced, quickly perform scanning and end unit registration and parameter
setting.
●
Even if the model name has been set, it will not be reflected in the unit list. Model name setting uses
the electricity charge apportionment parameter.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
257
Tree View, but
Advertisement
Table of Contents
