15-2
Site setting
When adding and deleting sites to be monitored, perform monitoring site setting by Site Navigator. (Up to
10 sites can be registered.)
Click [Setup].
Enter the name of the site to be monitored at "Site Name".
(Within 20 characters of alphabet, numeric, and symbol)
(a) (c)
Enter the IP address. (For local connection, enter 127.0.0.1.)
●
For LAN connections and server PCs.
●
For internet connection, enter the global IP address of server PC.
●
For dial up connection, enter the IP address of server PC set by Incoming setting
The Port No. to be set is displayed.
5
Specify encryption of the signals to be sent and received at the "Encryption" check box.
When the check box is checked, it is available.
Recommended when using the internet or other open line, etc.
Match with the setting of the connection destination VRF Controller.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
5
(b)
→ See par. 12-3 Port Setting
→ See par. 12-2 Security setting
143
→ See par. 6-1-1 Incoming setting