Fujitsu AIRSTAGE UTY-ALGX Instruction Manual page 99

System controller lite for vrf system
Table of Contents

Advertisement

5
Refrigerant system name:
To perform automatic name setting at all the refrigerant systems, select "All Ref. System".
(The unit names in the refrigerant systems become the same Start name + serial No.)
To perform setting by specifying a refrigerant system range, select "Specify Refrigerant System Range"
and specify the start number and end number.
(Arbitrary Start name + Serial No. for each specified refrigerant system.)
When the selected start No. is larger than the end No., the end number is automatically set to the
same value as the start No..
When the selected end No. is smaller than the start No., the start No. is automatically set to the same
value as the end No..
R/C group name setting:
The R/C group and the name of the start name and serial No. combination are set for each refrigerant
system specified at 5. (Indoor unit only)
Prefix:
Specifies the arbitrary character string given to beginning of the name set at a detected R/
C group. (Within 16 characters of alphabet, numeric, and symbol)
Ext. No.:
Specifies the start value and number of digits of the number given at the end of the name
set at a detected R/C group. Numerical string only.
When the number exceeded the specified number of digits, the necessary Numerical string
only. (Within 4 digits)
0 → 1 digit starting from 0 (0, 1, 2, ---9, 10, 11---)
0021 → 4 digits starting from 21 (0021, 0022, 0023---)
[Start (Stop)] button:
Starts the operation detection mode. The operation detection mode is ended by [Stop] button.
In the operation detection mode, the target network and refrigerant system range units are monitored.
Serial numbers are assigned to units in the relevant refrigerant system range in the order in which the
units were operated by R/C and they are displayed at the top line of
[OK]:
Saves the edited contents and ends editing work.
(At initial starting, [Back]: Returns to unit registration)
[Cancel]:
Ends editing work without saving the scanned result.
(At initial starting, [Next]: Advances to Group setting)
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
Unit list.
99

Advertisement

Table of Contents
loading

Table of Contents