Table of Contents
Advertisement
Operation mode switching
Select the operation mode to be set.
Depending on the System Type, etc, there may be operation modes which cannot be set.
When not performing operation mode switching, leave the setting as it is.
Temperature setting
Set an arbitrary temperature from the [v] and [
Direct numeric input is also possible. Input the temperature after making the selections inside the blue
frame.
(S/V Series: 1.0ºC units, V-II/V-III/VR-II/J-II/J-IIS Series: 0.5ºC units)
The room temperature setting range is within the set upper/lower temperature limits range.
When the room temperature is not to be changed, leave the setting as it is.
Upper/lower temperature limits setting
The temperature setting operable range in each operation mode can be set for V-II/V-III/VR-II/J-II/J-IIS Se-
ries.
Set an arbitrary temperature range from the [v] and [
0.5ºC units.
Direct numeric input is also possible. Make the selections inside the blue range to be input and input in
0.5ºC units.
Upper limit only or lower limit only can also be set.
To enable upper/lower limits setting, select [Enable].
To disable upper/lower limits setting, select [Disable].
When the upper/lower limits setting is not changed, leave the setting as it is.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
] buttons.
Λ
] buttons. The temperature range can be set in
Λ
185
Advertisement
Table of Contents
