Table of Contents
Advertisement
"Operation"
"Operation Setting" (17-2)
Controls the operation of R/C group and group.
*
Can only be selected by users with the Operation Control right.
"Schedule Setting" (18)
Set the operation schedule of R/C group and group.
*
Can only be selected by users with the Operation Control right.
"Memory Operation" (17-3)
Performs the following settings:
"Load Operation" (17-3-1)
Reads the preset operation pattern to R/C group and group.
*
Can only be selected by users with the Operation Control right.
"Save Operation" (17-3-2)
Saves the set operation pattern to R/C group and group.
*
Can only be selected by users with the Operation Control right.
"Low Noise Operation" (21)
Sets the schedule of low noise operation mode for groups.
*
Can only be selected by users with the Operation Control right.
"Energy Saving" (24)
Basic setting for energy saving is performed.
*
Energy Saving option is necessary.
Copyright© 2013-2015 Fujitsu General Limited. All rights reserved.
147
Advertisement
Table of Contents
