Maintenance Items - Panasonic VL-W1-N Series Setup And Maintenance Manual

7-1 Maintenance Items

Listed below are typical parts that require cleaning or replacement depending on the usage environment or duration of
service of the laser welding machine. Some parts are maintainable by the customer, and other parts are required to be
repaired or replaced by our service representative, depending on the types of parts and the defects.
For purchasing replacement parts or requesting our service representative to repair or replace parts, contact our sales
agency.
y
No. Parts name
Protection glass of laser emission port
q
Galvano scanner
w
Internal shutter
e
Laser oscillator
r
Air filter
t
Intake vent
y
Air-cooling fan
u
Fuse
i
Battery inside the controller
o
• Be sure to use our specified replacement parts. If the user applies any other fuses than the specified one, failure might
result.
• Some optional items cannot be sold due to regulations in each country or region. For detailed information, please
contact our sales office.
140
Head
Controller
o
t
Front
Main cause for
degradation
Contamination
Aging
Aging
Aging
Contamination
Contamination
Contamination
Blown
Aging
ME-VLW1N-SM-1
e
w
q
u
r
Daily maintenance
Cleaning
―
―
Check output power
Cleaning
Cleaning
Cleaning
―
―
i
u
Rear
Replacement when
degraded or defective
Customer-replaceable
By our service representative
By our service representative
By our service representative
Customer-replaceable
―
By our service representative
Customer-replaceable
By our service representative