Panasonic VL-W1-N Series Setup And Maintenance Manual page 67

„ Termination
1.
Turn off the laser supply switch on the controller.
• Under the remote control mode, turn off the laser supply by using LASER
SUPPLY IN (X9) on I/O terminal or the serial communication command for the
laser pumping (LSR).
2.
If you want to save the file, click "Save".
3.
Turn off the key switch and pull it out from the controller.
The system key should be in safekeeping by a laser safety manager.
ME-VLW1N-SM-1
OFF
ON
67