Connection Of Display Device - Panasonic VL-W1-N Series Setup And Maintenance Manual

2-5-3 Connection of display device

The setting data for the laser processing is configured with the display operation connected to the controller.
The following display devices can be connected to the laser welding machine.
Touch panel console (Optional item)
q
Connect the touch panel console supplied as an optional item to the controller.
The drawing data and other lasing parameters are set by the touch operation.
Refer to "Connection of Console" (P.59).
• Turn OFF the power of laser welding machine when connecting or
disconnecting the console.
• To purchase the console and for the detailed information, please contact our
sales office.
Monitor and mouse (Commercially available items)
w
Connect the commercially available monitor and mouse to the controller.
The drawing data and other lasing parameters are set by the mouse
operation.
Refer to "Connection of Monitor and Mouse" (P.60).
58
ME-VLW1N-SM-1
Touch panel console
Mouse
Monitor