Controller - Panasonic VL-W1-N Series Setup And Maintenance Manual

1-6-2 Controller

„ Front
7
8
1
6
VL-W1500-N, VL-W1506-N
1. Key switch: POWER
The main power switch for the laser welding machine.
Turn ON ( | ) the key switch to start-up the system, and turn OFF ( ○ ) to shut down the
system.
Only when the key switch is turned OFF (in O position), the key can be pulled out.
When the laser welding machine is not in use, the key should be in safekeeping by a
laser safety manager.
In case of turning ON the power supply after turning OFF, leave the interval five seconds or more between ON and
OFF.
Do not turn off the power supply while the system starts (during MAIN indicator is flashing).
2. Controller display panel
The indicator that shows the status of laser radiation and the laser
welding machine.
No. Display name
FILE No. / ERROR
q
CODE
MAIN
w
LASING
e
2
5
4
3
9
Status
Normal status
Alarm or warning status
System startup state
System starting up (not completed)
Being in laser emitting
ME-VLW1N-SM-1
7
8
1
6
VL-W1A00-N, VL-W1A06-N
w
e
Indication
Displays the file number selected.
Displays the error code.
Refer to "Error Indication" (P.165).
Green lighted-up
Green flashing
Orange lighted-up
2
5
4
3
9
OFF
ON
q
33