Husqvarna DXR 95 Operator's Manual page 121

The tension function of the caterpillar tracks has
check valves. The tension of the caterpillar tracks
can decrease if 1 of the check valves is blocked or
damaged. For instructions on how to clean the check
To clean the check valves for the
valves, refer to
caterpillar track tension (DXR 145) on page 123 and To
clean the check valves for the caterpillar track tension
(DXR 275, DXR 305, DXR 315) on page 123 .
To remove and install the caterpillar tracks
(DXR 145)
1. Start the product. Refer to
145) on page 71 .
2. Park the product on level ground.
3. Fully extend the outriggers. Refer to
outriggers on page 83 .
4. Stop the product. Refer to
145) on page 83 .
5. Remove the left side cover (A).
6. Turn the lock knob counterclockwise (B).
7. Turn the valve for caterpillar track tension (C)
counterclockwise to the end position to open the
valve. This releases the pressure.
8. Do the procedure that follows on each side of the
product.
1401 - 005 - 11.01.2024
To start the product (DXR
To operate the
To stop the product (DXR
A
B
C
a) Push the tension wheel to the center.
b) Remove the caterpillar tracks.
c) Install new caterpillar tracks.
9. Turn the valve for caterpillar track tension clockwise
to close the valve.
10. Turn the lock knob clockwise.
11. Install the left side cover.
12. Start the product and do automatic caterpillar track
To do automatic caterpillar track
tension. Refer to
tension (DXR 145, DXR 275, DXR 305, DXR 315) on
page 122 .
To remove and install the caterpillar tracks
(DXR 275, DXR 305, DXR 315)
1. Start the product. Refer to
275, DXR 305, DXR 315) on page 72 .
2. Park the product on level ground.
3. Fully extend the outriggers. Refer to
outriggers on page 83 .
4. Stop the product. Refer to
275, DXR 305, DXR 315) on page 84 .
To start the product (DXR
To operate the
To stop the product (DXR
121