Husqvarna DXR 95 Operator's Manual page 60

Position Movement
12 Arm 1 and 2 in.
13 Rotate the tower counterclockwise.
14 Rotate the tower clockwise.
15 Tool in. The function also operates when the right top button is pushed down. Arm 1 and 2 can be
operated in parallel and when you move the tool when the right top button is pushed down.
16 Tool out. The function also operates when the right top button is pushed down. Arm 1 and 2 can be
operated in parallel and when you move the tool when the right top button is pushed down.
"Pattern 3"
The operation mode switch on the remote control is
used to select between work mode and transport mode.
Operation modes on page 81 .
Refer to
3
Position Movement
1 Arm 2 down.
2 Arm 2 up.
3 Tool in. The function also operates when the right top button is pushed down. Arm 1 and 2 can be
operated in parallel and when you move the tool when the right top button is pushed down.
4 Tool out. The function also operates when the right top button is pushed down. Arm 1 and 2 can be
operated in parallel and when you move the tool when the right top button is pushed down.
5 DXR 315: Telescopic arm out.
6 DXR 315: Telescopic arm in.
7 Arm 3 up.
8 Arm 3 down.
9 Arm 1 and 2 out.
60
1
4
2
Work mode or transport mode and crawl selected:
5
11
13
6
7
9
12
14
10
8
1401 - 005 - 11.01.2024