Husqvarna DXR 95 Operator's Manual page 52

top buttons on the left joystick. Refer to
tool 1–3" on page 49 .
• "Extra 1/Extra 2": the side switch controls "Extra
function 1" and "Extra function 2". If the extra
function is not in operation, the side switch is off.
• "Tool": the side switch on the left joystick controls
the tool function.
• "Off": the side switch is off.
• "Precision" sets the precision of the joysticks.
• "Reset to factory settings" resets the joysticks.
Pattern
Side switch setup
Precision
Reset to factory settings
3
Position Movement
1 Arm 3 up.
2 Arm 3 down.
3 Rotate the tower counterclockwise.
4 Rotate the tower clockwise.
5 DXR 315: Telescopic arm out.
6 DXR 315: Telescopic arm in.
7 Arm 2 down.
52
"Custom
1
4
2
"Pattern 1"
"Pattern 1" is used as standard. The operation mode
switch on the remote control is used to select between
work mode and transport mode. Refer to
modes on page 81 .
Work mode selected:
5
11
13
6
Operation
7
9
12
14
10
8
1401 - 005 - 11.01.2024