Position
Movement
16
Rotate the tower clockwise.
"Pattern 4"
The operation mode switch on the remote control is
used to select between work mode and transport mode.
Operation modes on page 81 .
Refer to
3
Position
Movement
1
Rotate the tower counterclockwise.
2
Rotate the tower clockwise.
3
Arm 3 up.
4
Arm 3 down.
5
DXR 315: Telescopic arm out.
6
DXR 315: Telescopic arm in.
7
Arm 2 down.
8
Arm 2 up.
9
Arm 1 and 2 out.
10
Arm 1 and 2 in.
11
Arm 1 in.
12
Arm 2 out.
13
Tool in. The function also operates when the right top button is pushed down. Arm 1 and 2 can be
operated in parallel and when you move the tool when the right top button is pushed down.
14
Tool out. The function also operates when the right top button is pushed down. Arm 1 and 2 can be
operated in parallel and when you move the tool when the right top button is pushed down.
1401 - 005 - 11.01.2024
1
4
2
Work mode or transport mode and crawl selected:
5
11
13
6
7
9
12
14
10
8
63