Husqvarna DXR 95 Operator's Manual page 93

6. Clean the area around the air filter.
7. Remove the air filter to release the hydraulic
pressure in the hydraulic oil tank.
8. Wait 5 minutes for the hydraulic pressure to
decrease through internal leakage.
9. Install the air filter on the hydraulic oil tank.
10. Close the left hatch on the product.
For the caterpillar track unit, release the hydraulic
pressure in the hydraulic accumulator. Refer to
remove and install the caterpillar tracks (DXR 275, DXR
305, DXR 315) on page 121 .
To do a check of the hydraulic oil level
(DXR 95, DXR 145)
1. Park the product on level ground.
2. Fully retract the arm system.
3. Fully retract the outriggers. Refer to
outriggers on page 83 .
1401 - 005 - 11.01.2024
4. Press the menu button (A) on the remote control.
5. Select "Oil refill" in the "Function" menu on the
6. Read the hydraulic oil level on the display.
7. Fill with hydraulic oil if the hydraulic oil level is less
To do a check of the hydraulic oil level
(DXR 275, DXR 305, DXR 315)
1. Park the product on level ground.
2. Fully retract the arm system.
3. Fully retract the outriggers. Refer to
To
To operate the
12345 H
A
display.
Tools
Machine status
Functions
Controls
System
than or equal to 80%. Refer to
oil (DXR 95) on page 97 or To fill the hydraulic oil
(DXR 145) on page 98 .
outriggers on page 83 .
XX BAR
Oil refill
Track tension
To fill the hydraulic
To operate the
93