Husqvarna DXR 95 Operator's Manual page 82

Position Use
To adjust the pressure or the flow to the
3
drum cutter.
To give full pressure or flow to the drum
4
cutter.
To open the concrete crusher, the steel
shears or the grapple.
5
Note:
Different cutters use different top
buttons to open or close the cutters.
To close the concrete crusher, the steel
shears or the grapple.
6
Note:
Different cutters use different top
buttons to open or close the cutters.
7 To shake the bucket.
8 To shake the bucket.
To operate the joysticks with "Extra function"
in operation
1. Press the menu button on the remote control.
2. Select "Custom tool 1-3" in the "Tools" menu on the
display.
3. Select "Extra function 1" or "Extra function 2". Refer
"Custom tool 1–3" on page 49 .
to
4. Push the operation mode switch (A) up to select
work mode.
1
3
A
82
5. If "Side switch setup" is set to "Auto" or "Extra 1/
Extra 2", use the side switches on the joysticks as
shown in the illustration. Refer to
page 51 .
6. If "Side switch setup" is set to "Off", use the right
joystick as shown in the illustration below.
1
2
Position Use
1 "Extra function 1": To select direction 1 of
the hydraulic oil.
2 "Extra function 1": To select direction 2 of
the hydraulic oil.
3 "Extra function 2": To select direction 1 of
the hydraulic oil.
4 "Extra function 2": To select direction 2 of
the hydraulic oil.
"Joystick setup" on
3
4
1401 - 005 - 11.01.2024