Lldp Profile - Dell 8 Command Reference Manual

lldp profile

Applies a Link Layer Discovery Protocol (LLDP) profile on an interface.
Synopsis lldp profile name
no lldp profile
Operands name
Defaults If the parameters are not defined in the profile, the default values are used.
Command Interface configuration mode
Modes
Description Use this command to apply a Link Layer Discovery Protocol (LLDP) profile on an interface. Use the
no lldp profile command to delete the profile from the interface.
Usage You must use the profile command to create an LLDP profile before you can apply the profile to the
Guidelines interface. Only one LLDP profile can exist at any time for a particular interface. When this command
is not present, the parameters defined in the global LLDP configuration are used.
Examples To apply an LLDP profile on an interface:
See Also protocol lldp
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies the profile name.
switch(conf-if-te-0/1)#lldp profile test
6
lldp profile
109