Show Qos Maps - Dell 8 Command Reference Manual

16

show qos maps

show qos maps
Displays information on the defined QoS maps.
Synopsis show qos maps [{cos-mutation [name] | cos-traffic-class [name]}]
Operands cos-mutation name
cos-traffic-class name
Defaults The default behavior without any specified operands is to report on all defined QoS maps.
Command EXEC mode
Modes
Description Use this command to display information on the QoS defined maps. For each QoS map, the
configuration state is displayed with a list of all interfaces bound to the QoS map.
Usage There are no usage guidelines for this command.
Guidelines
Examples To display information on the defined QoS maps:
See Also qos maps, show qos interface
262
Specifies to report on only the named CoS-to-CoS mutation QoS map.
Specifies to report on only the named CoS-to-Traffic Class QoS maps.
switch#show qos maps
CoS-to-CoS Mutation map 'test'
In-CoS: 0 1
--------------------------------
Out-CoS: 0 1
Enabled on the following interfaces:
Te 0/5
CoS-to-Traffic Class map 'test'
Out-CoS: 0
-------------------------------------
TrafficClass: 0
Enabled on the following interfaces:
Te 0/5
2 3 4 5 6 7
2 3 5 4 6 7
1 2 3 4 5 6 7
1 2 3 5 4 6 7
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01