Ip Address - Dell 8 Command Reference Manual

ip address

Configures an IP address.
Synopsis ip address ip-address/mask [secondary]
no ip address ip-address/mask [secondary]
Operands ip-address
mask
secondary
Description Use this command to configure an IP address.
Defaults There are no default configurations for this command.
Command Interface configuration mode
Modes
User Guidelines Use no ip address to remove the IP address.
This command is supported on VLANs, LAGs and external TenGigabitEthernet interfaces.
When the secondary parameter is not specified, this command overwrites the primary IP address.
When the secondary parameter is specified, this command adds a new IP address to the interface.
The secondary address cannot be configured in the absence of a primary IP.
Example none
See Also none
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
IP address
Mask for the associated IP subnet. Only integers from 1-31 are supported.
Dotted-decimal is not supported.
Specifies that the configured address is a secondary IP address. If this
keyword is omitted, the configured address is the primary IP address.
5
ip address
83