Show Media Linecard - Dell 8 Command Reference Manual

show media linecard

Displays the SFP information for all the interfaces of a specific line card.
Synopsis show media linecard number
Operands number
Defaults There are no default configurations for this command.
Command Privileged EXEC mode
Modes
Description Use this command to display a summary of the SFP information for a specific line card. The output
contains information for each interface on the line card, and is several pages long.
Usage There are no usage guidelines for this command.
Guidelines
Examples To show the SFP information for line card number 0:
See Also show media interface, show media
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Linecard number.
switch#show media linecard 0
Interface InTenGigabitEthernet 0/1
Identifier 3
Connector 7
Transceiver 0000000000000010 10_GB/s
Name id
Encoding 6
Baud Rate 103 (units 100 megabaud)
Length 9u 0
Length 9u 0
Length 50u 8
Length 62.5u 3
Length Cu 0
Vendor Name BROCADE
Vendor OUI 42:52:4f
Vendor PN 57-0000075-01
Vendor Rev A
Wavelength 850 (units nm)
Options 001a Loss_of_Sig,Tx_Fault,Tx_Disable
BR Max 0
BR Min 0
Serial No AAA108454100431
Date Code 081108
Temperature 44 Centigrade
Voltage 3246.8
Current 0.002
TX Power 0.1
RX Power 0.1
(output truncated)
SFP
LC
(units km)
(units 100 meters)
(units 10 meters)
(units 10 meters)
(units 1 meter)
(Volts)
(mAmps)
(uWatts)
(uWatts)
show media linecard
2
33