Show Lldp Neighbors - Dell 8 Command Reference Manual

6

show lldp neighbors

show lldp neighbors
Displays LLDP information for all neighboring devices on the specified interface.
Synopsis show lldp neighbors [interface {in | ex}tengigabitethernet slot/port detail]
Operands interface
Defaults There are no default configurations for this command.
Command EXEC mode
Modes
Description Use this command to display LLDP information for all neighboring devices on the specified
interface.
Usage If you do not use the interface operand, only the mandatory TLVs are displayed.
Guidelines
Examples To display detailed LLDP neighbor information on a specific interface:
116
Use this keyword to specify the10 Gbps Ethernet interface using the following
operand followed by the slot or port number.
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
detail Displays all the LLDP neighbor information in detail for the specified
interface.
switch#show lldp neighbors interface intengigabitethernet 0/8 detail
Neighbors for Interface Te 0/8
MANDATORY TLVs
===============
Local Interface: Te 0/8
Dead Interval: 120 secs
Chassis ID: 0005.1e76.1020 (MAC)
Remote Mac: 0005.1e76.102c
OPTIONAL TLVs
==============
Port Interface Description: Te 0/8
System Name: sw0
System Description: Fibre Channel Switch.
System Capabilities: Switching Routing
System Capabilities Enabled: Switching
Remote Interface: Te 0/8 (IF Name)
Remaining Life : 100 secs Tx: 536
Dell Converged Enhanced Ethernet Command Reference
Rx: 535
53-1002115-01