Show Lldp Statistics - Dell 8 Command Reference Manual

6

show lldp statistics

show lldp statistics
Displays the LLDP statistics on all interfaces or a specified interface.
Synopsis show lldp statistics [interface {in | ex}tengigabitethernet slot/port]
Operands interface
interface
Defaults There are no default configurations for this command.
Command EXEC mode
Modes
Description Use this command to display LLDP statistics on all interfaces or a specified interface.
Usage If you do not specify the interface tengigabitethernet operand, this command displays the LLDP
Guidelines statistics for all interfaces.
Examples To display LLDP statistics on the specified interface:
See Also none
118
Use this keyword to specify the 10 Gbps Ethernet interface using the following
operand followed by the slot or port number.
Use this keyword to specify any of the following interfaces:
extengigabitethernet
Specifies a valid external 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
intengigabitethernet
Specifies a valid internal 10 Gbps Ethernet interface.
slot Specifies a valid slot number.
port Specifies a valid port number.
switch#show lldp statistics interface intengigabitethernet 0/8
LLDP Interface statistics for Te 0/8
Frames transmitted: 555
Frames Aged out: 0
Frames Discarded: 0
Frames with Error: 0
Frames Recieved: 554
TLVs discarded: 0
TLVs unrecognized: 0
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01