Transmit-Holdcount - Dell 8 Command Reference Manual

transmit-holdcount

Configures the maximum number of Bridge Protocol Data Units (BPDUs) transmitted per second for
the Multiple Spanning Tree Protocol (MSTP) and the Rapid Spanning Tree Protocol RSTP.
Synopsis transmit-holdcount number
no transmit-holdcount
Operands number
Defaults The default is 6.
Command Protocol Spanning Tree MSTP mode
Modes
Description Use this command to configure the BPDU burst size by changing the transmit hold count value. Use
the no transmit-holdcount command to return to the default setting.
Usage There are no usage guidelines for this command.
Guidelines
Examples To change the number of BPDUs transmitted to 3 seconds:
See Also show spanning-tree mst detail
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies the value in seconds for the number of BPDUs than can be sent
before pausing for 1 second. The range of valid values is 1-10.
switch(conf-mstp)#transmit-holdcount 3
11
transmit-holdcount
197