2
show startup-config
show startup-config
Displays the content of the startup configuration file.
Synopsis
show startup-config
Operands
none
Defaults
There are no default configurations for this command.
Command
Privileged EXEC mode
Modes
Description
Use this command to display the contents of the startup configuration file.
Usage
The following guidelines apply when using this command:
Guidelines
•
•
•
Examples
To show the content of the startup configuration file:
See Also
write memory, write erase
38
An error displays if there are no entries in the startup configuration file, for example
switch#show startup-config
% No Startup-config
Use the write memory command to add entries to the startup configuration file.
Using the write erase command to delete entries from startup configuration file.
switch#show startup-config
!
no protocol spanning-tree
!
interface Vlan 1
!
interface InTenGigabitEthernet 0/0
shutdown
!
interface InTenGigabitEthernet 0/1
shutdown
!
interface InTenGigabitEthernet 0/2
shutdown
!
interface InTenGigabitEthernet 0/3
shutdown
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01