Line Vty - Dell 8 Command Reference Manual

line vty

Configures the virtual terminal line setting to allow you to set the wait time interval for the Telnet
session to time out.
Synopsis line vty first number last number
Operands first number
last number
Defaults There are no default configurations for this command.
Command Global configuration mode
Modes
Description Use this command to configure the virtual terminal line settings to set the exec-timeout.
Usage There are no usage guidelines for this command.
Guidelines
Examples To configure the wait interval for the telnet session to time out after 2 minutes, 30 seconds if there
is no response from the user:
See Also show line
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01
Specifies the first line number. The range of valid values is 0-31.
Specifies the last line number. The range of valid values is 0-31.
switch#configure terminal
switch(config)#line vty 23 31
switch(conf-line)#exec-timeout 2 30
2
line vty
19