11
spanning-tree autoedge
spanning-tree autoedge
Enables automatic edge detection.
Synopsis
spanning-tree autoedge
no spanning-tree autoedge
Operands
none
Defaults
Auto detection is not enabled.
Command
Interface configuration mode
Modes
Description
Use this command to automatically identify the edge port.
Usage
The port can become an edge port if no Bridge Protocol Data Unit (BPDU) is received.
Guidelines
Examples
To enable automatic edge detection:
See Also
protocol spanning-tree
184
switch(conf-if-te-0/1)#spanning-tree autoedge
Dell Converged Enhanced Ethernet Command Reference
53-1002115-01