Show Lacp Counter - Dell 8 Command Reference Manual

7

show lacp counter

show lacp counter
Displays the Link Aggregation Control Protocol (LACP) counters on all port-channels or a specified
interface.
Synopsis show lacp counter number
Operands number
Defaults There are no default configurations for this command.
Command EXEC mode
Modes
Description Use this command to display the LACP packet counters on all interfaces that belong to a
port-channel or a specific interface.
Usage There are no usage guidelines for this command.
Guidelines
Examples To show the LACP counters for port-channel 10:
See Also clear lacp counters
130
Specifies the port-channel number to display. The range of valid values is
1-63.
switch#show lacp counter 10
% Traffic statistics
Port LACPDUs
Sent Recv
% Aggregator Po 10 1000000
Te 0/1 65 0
Te 0/2 64 0
Te 0/3 64 0
Te 0/4 0 0
switch#
Marker Pckt err
Sent Recv Sent
0 0
0 0
0 0
0 0
Dell Converged Enhanced Ethernet Command Reference
Recv
0 0
0 0
0 0
0 0
53-1002115-01